Potential Garage Door Opener Problems and How to Fix them

Home/garage doors/Potential Garage Door Opener Problems and How to Fix them

Potential Garage Door Opener Problems and How to Fix them

 

There are several garage door opener problems that you can handle yourself. You need not hire a technician, and so, you can save a lot of money.

Garage door openers come with complex mechanics and many different components, including optic sensors, remote control, motors, chains, limit switch, roller, tracks, transmitters, wiring, etc.

However, a garage door openers operate in quite a simple manner. As the motor rotates clockwise, the garage door opens. As the limit switch causes the motor to rotate anti-clockwise, the door closes. This rotating motion turns into mechanical motion, and chains help in closing and opening garage doors.

Thus, every component has a function to perform. A small problem with any of these components can cease the proper functionality of your garage door opener. Here are some potential garage door opener problems with simple instructions for DIY fixing:

1.    Non-Responsive Remote

You press a button, but the door does not open; you try pressing the internal button, and the door opens. This is a usual case of a non-responsive garage door opener remote.

How to Make a Remote Work?

A simple way to fix this issue is to replace the batteries.

However, if the remote still does not function, you should look into its program following the instruction manual. Reprogramming makes a remote operating.

If the remote still does not work, you need to buy a new garage door opener remote.

2.    Garage Door Does Not Open

If your garage door neither opens with a remote nor with an internal button, it indicates a problem with some other component of your garage door, most potentially the motor.

How to Fix the Motor?

In such a case, you need to check if the motor is functioning properly. You should also attempt a clean-up as dirt and debris accumulate over time, hindering the optimal functioning of the motor.

If everything is in the right place, but the garage door isn’t opening, you need to call for professional assistance.

3.    Screeching or Unusual Noises

Usually, garage doors screech or make some unusual noises when homeowners do not pay attention to maintenance. Your garage door needs timely lubrication to make sure that its parts stay in good working condition.

How to Eliminate Noises?

To prevent noises, clean the tracks to remove the debris. Follow it by a good lubrication process. This makes a huge difference to the noises as well as the overall functioning of your garage door.

4.    Opening and Closing Itself

Another common issue that homeowners usually come across is a garage door opening and closing on its own.

The major cause behind this malfunctioning is a short circuit in transmitters or wiring. The first thing you should do here is checking your transmitter to detect a short circuit.

How to Detect Short Circuit in Transmitter?

It is easy to check if there is a short circuit in the transmitter. You do not need any tools for this purpose. If your transmitter keeps sending signals continuously, it indicates a short circuit.

So, the door keeps closing completely. Soon, the arms run, and as the carriage crosses the downward limit, it will be the header. This reverses the action, and instead of closing, your garage door keeps opening.

How to Fix Short Circuit?

A simple way to fix the short circuit in the transmitter is removing the batteries. Place the batteries again and check if the problem pertains. If yes, there is likely a short circuit in the wiring.

The wiring might need total replacement, so it is best to ask for professional help.

The Modern Way to Fix Garage Door Opener Problems

The modern and advanced garage door openers of the present generation have a technological built. The programming is always visible through a monitor. Most homeowners install separate monitors for garage door openers or enable the programming on their existing ones.

So, when there is a problem, the monitor will display what and where the problem might be. All you need to do is check the monitor and look for troubleshooting instructions.

Such technologically advanced systems offer great advantages to the users. It saves a lot of time that you would otherwise spend on detecting the potential problem and finding its cause. It prevents you from spending enormous costs on garage door repairs.

However, these systems require regular maintenance if you want to enjoy the trouble-free performance. Follow the manufacturer’s maintenance guidelines, and you are good to go!

Final Thoughts

If your garage door opener comes equipped with a trouble-shooter, there is less that remains to do on your part. On the other hand, if you have a conventional garage door opener, you need to find the potential problem and come up with the right ways to fix the issue.

All the above-mentioned problems can easily be handled on your own. Put in some effort, and you can save up on huge repair bills!

By | 2021-02-16T22:49:26+00:00 February 16th, 2021|garage doors|0 Comments

About the Author: